1.00 |
Implement secure networks using Cisco ASA Firewalls |
| |
(1) Perform basic firewall Initialization |
| |
(2) Configure device management |
| |
(3) Configure address translation (nat, global, static) |
| |
(4) Configure ACLs |
| |
(5) Configure IP routing |
| |
(6) Configure object groups |
| |
(7) Configure VLANs |
| |
(8) Configure filtering |
| |
(9) Configure failover |
| |
(10) Configure Layer 2 Transparent Firewall |
| |
(11) Configure security contexts (virtual firewall) |
| |
(12) Configure Modular Policy Framework |
| |
(13) Configure Application-Aware Inspection |
| |
(14) Configure high availability solutions |
| |
(15) Configure QoS policies |
2 |
Implement secure networks using Cisco IOS Firewalls |
| |
(1) Configure CBAC |
| |
(2) Configure Zone-Based Firewall |
| |
(3) Configure Audit |
| |
(4) Configure Auth Proxy |
| |
(5) Configure PAM |
| |
(6) Configure access control |
| |
(7) Configure performance tuning |
| |
(8) Configure advanced IOS Firewall features |
3 |
Implement secure networks using Cisco VPN solutions |
| |
(1) Configure IPsec LAN-to-LAN (IOS/ASA) |
| |
(2) Configure SSL VPN (IOS/ASA) |
| |
(3) Configure Dynamic Multipoint VPN (DMVPN) |
| |
(4) Configure Group Encrypted Transport (GET) VPN |
| |
(5) Configure Easy VPN (IOS/ASA) |
| |
(6) Configure CA (PKI) |
| |
(7) Configure Remote Access VPN |
| |
(8) Configure Cisco Unity Client |
| |
(9) Configure Clientless WebVPN |
| |
(10) Configure AnyConnect VPN |
| |
(11) Configure XAuth, Split-Tunnel, RRI, NAT-T |
| |
(12) Configure High Availability |
| |
(13) Configure QoS for VPN |
| |
(14) Configure GRE, mGRE |
| |
(15) Configure L2TP |
| |
(16) Configure advanced Cisco VPN features |
| |
(b) Ethernet, Fast Ethernet, and Gigabit Ethernet |
| |
(c) PPP over Ethernet (PPPoE) |
4 |
Configure Cisco IPS to mitigate network threats |
| |
(1) Configure IPS 4200 Series Sensor Appliance |
| |
(2) Initialize the Sensor Appliance |
| |
(3) Configure Sensor Appliance management |
| |
(4) Configure virtual Sensors on the Sensor Appliance |
| |
(5) Configure security policies |
| |
(6) Configure promiscuous and inline monitoring on the Sensor Appliance |
| |
(7) Configure Remote Access VPN |
| |
(8) Configure and tune signatures on the Sensor Appliance |
| |
(9) Configure custom signatures on the Sensor Appliance |
| |
(10) Configure blocking on the Sensor Appliance |
| |
(11) Configure TCP resets on the Sensor Appliance |
| |
(12) Configure rate limiting on the Sensor Appliance |
| |
(13) Configure signature engines on the Sensor Appliance |
| |
(14) Use IDM to configure the Sensor Appliance |
| |
(15) Configure event action on the Sensor Appliance |
| |
(16) Configure advanced features on the Sensor Appliance |
| |
(17) Configure and tune Cisco IOS IPS |
| |
(18) Configure SPAN & RSPAN on Cisco switches |
5 |
Implement Identity Management |
| |
(1) Configure RADIUS and TACACS+ security protocols |
| |
(2) Configure LDAP |
| |
(3) Configure Cisco Secure ACS |
| |
(4) Configure certificate-based authentication |
| |
(5) Configure proxy authentication |
| |
(6) Configure 802.1x |
| |
(7) Configure advanced identity management features |
| |
(8) Configure Cisco NAC Framework |
6 |
Implement Control Plane and Management Plane Security |
| |
(1) Implement routing plane security features (protocol authentication, route filtering) |
| |
(2) Configure Control Plane Policing |
| |
(3) Configure CP protection and management protection |
| |
(4) Configure broadcast control and switchport security |
| |
(5) Configure additional CPU protection mechanisms (options drop, logging interval) |
| |
(6) Disable unnecessary services |
| |
(7) Control device access (Telnet, HTTP, SSH, Privilege levels) |
| |
(8) Configure SNMP, Syslog, AAA, NTP |
| |
(9) Configure service authentication (FTP, Telnet, HTTP, other) |
| |
(10) Configure RADIUS and TACACS+ security protocols |
| |
(11) Configure device management and security |
7 |
Configure Advanced Security |
| |
(1) Configure mitigation techniques to respond to network attacks |
| |
(2) Configure packet marking techniques |
| |
(3) Implement security RFCs (RFC1918/3330, RFC2827/3704) |
| |
(4) Configure Black Hole and Sink Hole solutions |
| |
(5) Configure RTBH filtering (Remote Triggered Black Hole) |
| |
(6) Configure Traffic Filtering using Access-Lists |
| |
(7) Configure IOS NAT |
| |
(8) Configure TCP Intercept |
| |
(9) Configure uRPF |
| |
(10) Configure CAR |
| |
(11) Configure NBAR |
| |
(12) Configure NetFlow |
| |
(13) Configure Anti-Spoofing solutions |
| |
(14) Configure Policing |
| |
(15) Capture and utilize packet captures |
| |
(16) Configure Transit Traffic Control and Congestion Management |
| |
(17) Configure Cisco Catalyst advanced security features |
8 |
Identify and Mitigate Network Attacks |
| |
(1) Identify and protect against fragmentation attacks |
| |
(2) Identify and protect against malicious IP option usage |
| |
(3) Identify and protect against network reconnaissance attacks |
| |
(4) Identify and protect against IP spoofing attacks |
| |
(5) Identify and protect against MAC spoofing attacks |
| |
(6) Identify and protect against ARP spoofing attacks |
| |
(7) Identify and protect against Denial of Service (DoS) attacks |
| |
(8) Identify and protect against Distributed Denial of Service (DDoS) attacks |
| |
(9) Identify and protect against Man-in-the-Middle (MiM) attacks |
| |
(10) Identify and protect against port redirection attacks |
| |
(11) Identify and protect against DHCP attacks |
| |
(12) Identify and protect against DNS attacks |
| |
(13) Identify and protect against Smurf attacks |
| |
(14) Identify and protect against SYN attacks |
| |
(15) Identify and protect against MAC Flooding attacks |
| |
(16) Identify and protect against VLAN hopping attacks |
| |
(17) Identify and protect against various Layer2 and Layer3 attacks |
